Venom Batteries

Venom Batteries: Practical Power for RC Cars, Boats, Planes, and Drones

Venom builds RC-focused LiPo and NiMH batteries known for broad fitment and easy setup. Many packs ship with a universal plug system for common connectors (e.g., Deans T‑plug, EC3/EC5, XT60), helping you run multiple models without rewiring. Options include soft packs for aircraft, hardcase packs for surface models, and capacities that balance runtime with weight.

When to Choose Venom

• You run a mixed fleet and want one pack to fit several models via plug adapters.
• You need durable hardcase LiPos for 1/10–1/8 cars and trucks.
• You prefer beginner-friendly labeling and straightforward charging guidance.
• You want NiMH stick packs for simple, low-maintenance setups or youth use.

Product Range at a Glance

• LiPo: Typically 2S–6S, capacities ~1000–8000 mAh, case styles in hardcase (surface) and soft pack (air/FPV).
• NiMH: Common 6–8 cell (7.2–9.6 V) stick and hump packs for RTR models and vintage electronics.
• Connectors: Universal plug systems and lead options to interface with Deans, EC3/EC5, XT60, and more. Avoid stacking multiple adapters to minimize resistance and heat.

Quick Picks by Use Case

How to Choose a Venom Pack

1. Voltage (S count): Match your ESC/motor limits. More cells increase speed/thrust but demand compatible electronics and gearing/prop selection.
2. Capacity (mAh): Higher mAh extends runtime but adds weight. Aircraft often benefit from lighter packs; cars may use larger packs if space allows.
3. C rating: Choose a rating that meets or slightly exceeds your system’s peak current. High-draw boats and 1/8 setups usually need 50C+.
4. Case style: Hardcase for surface impact protection; soft pack for aircraft or tight bays.
5. Connector & leads: Use the supplied universal adapter if needed, but minimize extra adapters and keep leads short to reduce voltage drop.

Runtime Estimate

Estimated minutes ≈ (capacity in mAh ÷ average amp draw) × 60.
Example: 5000 mAh (5 Ah) pack with a 20 A draw → (5 ÷ 20) × 60 ≈ 15 minutes.

Care, Charging, and Safety

• Charging: Balance-charge LiPos at ≤1C unless the pack explicitly supports higher. Never leave charging unattended.
• Storage: Store LiPos at 3.75–3.85 V per cell, ~40–60% state of charge, in a fire-resistant container.
• Temperature: Use between ~32–113°F (0–45°C). Let packs cool to ambient before recharging.
• Inspection: Do not use damaged, punctured, or swollen packs. Check for loose leads and worn adapters.
• ESC settings: Enable LiPo low-voltage cutoff (commonly 3.3–3.5 V per cell under load) to protect cells.

Compatibility Notes

• Measure your battery bay and check pack dimensions; hardcase sizes vary by model.
• Confirm connector fit and wire gauge; high-current builds benefit from lower-resistance connectors and minimal adapters.
• If your model requires proprietary “smart” packs, verify support before purchasing.

Performance Tips

• Match gearing/prop to current draw to keep pack and ESC temperatures in check.
• Secure the battery to prevent impact damage; avoid sharp edges and compression.
• For NiMH, plan 2–3 gentle cycles to reach full performance; avoid deep discharges that cause voltage depression.

FAQs