Makita BL1430B 14.4V Lithium-Ion 3.0Ah

Overview

The Makita BL1430B 14.4V 3.0Ah lithium‑ion battery is a dependable pack for everyday drilling, fastening, and light cutting on the 14.4V platform. It offers a good balance of runtime and low weight, with fast turnaround on compatible Makita Rapid Optimum chargers. Star Protection communication helps protect the pack and tool under load.

Key Specs

• Voltage/Capacity: 14.4V, 3.0Ah (Li‑ion)
• Charge Time: Typically ~30–60 minutes on Rapid Optimum chargers (varies by charger and temperature)
• Electronics: Star Protection to help prevent overheating, overload, and over‑discharge
• Form Factor: Slide‑style pack for Makita 14.4V Li‑ion tools

When to Choose This Battery

• Use if you want lighter weight and good balance for overhead or tight‑space work.
• Use for medium‑duty tasks: drilling pilot holes, driving 2–3 in. screws, light metal/wood drilling.
• Avoid if you need maximum runtime on high‑draw tools (circular saws, recip saws) — consider higher‑capacity 14.4V options where supported.

Typical Runtime Examples

Actual results vary by tool, bit, material, and temperature, but these ranges are common for a healthy pack:

• Driving 2–3 in. deck screws into softwood: about 120–200 screws per charge
• Drilling 1/4 in. holes in softwood: roughly 60–100 holes
• Light-duty impact fastening (M6–M8 bolts): several dozen fastenings per charge

Compatibility Notes

• Tools: For Makita 14.4V Li‑ion slide‑style tools. Not compatible with 18V LXT, 12V CXT, or older pod‑style/Ni‑Cd tools.
• Chargers: Works with Makita Rapid Optimum chargers designed for 14.4V/18V slide batteries (e.g., DC18RC, DC18RD). Check your charger’s label for supported voltages.
• Star Protection: Best performance when both tool and battery support Star Protection (look for the star symbol). The battery will still power compatible 14.4V tools without Star, but without data communication features.

Charging and Care

• Let a hot battery cool to room temperature before charging for fastest, safest turnaround.
• Charge and store in a dry area between about 50°F–86°F (10°C–30°C). Avoid charging below 32°F (0°C) or above 104°F (40°C).
• Rotate between two packs to reduce downtime and heat buildup.
• For storage over a month, leave at roughly 40–60% charge and top up every 3–6 months.

Safety

• Do not use or charge a damaged, swollen, or water‑exposed pack.
• Avoid shorting terminals; transport with terminal cover if provided.
• Keep out of direct sun or hot vehicles; heat accelerates cell wear.

Alternatives

• Need more runtime? Consider higher‑capacity 14.4V packs (where available) to reduce swap frequency, at the cost of extra weight.
• Need maximum power or wider tool selection? Makita’s 18V LXT platform offers more tool choices, but it is not cross‑compatible with 14.4V.

FAQ

How long does it take to charge?

On a Makita Rapid Optimum charger, a 3.0Ah pack typically takes about 30–60 minutes depending on charger model, battery temperature, and pack condition.

Will this work in any Makita 14.4V tool?

It fits Makita 14.4V Li‑ion slide‑style tools. It will not fit older pod‑style tools or other voltages (12V CXT or 18V LXT).

What is Star Protection?

Star Protection is a communication system between the tool and battery that helps monitor conditions during use to reduce the risk of overload, overheating, and over‑discharge.

How can I extend battery life?

Avoid deep discharges, keep the pack cool, store partially charged for long breaks, and stop use if you notice significant heat or a sudden drop in power.