Makita 192696-2 12V NiMH 2.6Ah

Overview

The Makita 192696-2 12V NiMH 2.6Ah battery is a dependable replacement for older Makita 12V pod-style tools. It delivers more capacity than many NiCd predecessors and resists memory effect, helping extend the useful life of legacy drills, drivers, lights, and other 12V tools.

Key Specs

• Voltage: 12V
• Capacity: 2.6Ah
• Chemistry: Nickel-Metal Hydride (NiMH)
• Approx. Energy: ~31 Wh (12V × 2.6Ah)

Compatibility

Designed for Makita 12V pod-style tools that originally used 12V NiCd/NiMH packs (e.g., 1220/1222/1234/1235 series). Always check your tool and charger labels or manual:

• Tool: Look for “12V” Makita pod-style interface (not slide-on Li-ion CXT/LXT).
• Charger: Use a Makita charger that explicitly supports NiMH chemistry for 12V pod-style batteries.

When to Choose

• Use if: You want to keep classic 12V Makita tools working with reliable runtime and factory-fit geometry.
• Use if: You are replacing worn NiCd packs and want reduced memory effect and longer runtime.
• Avoid if: You need the lightest weight, fastest charging, or cold-weather performance typical of modern Li-ion systems.

Runtime and Charging

Actual runtime varies by tool, material, and technique. As a rough guide for a healthy battery:

Task	Estimated runtime per charge
Intermittent drilling in softwood (1/8–3/8 in.)	15–30 minutes
Driving drywall/wood screws (#6–#8)	60–120 screws
Light-duty cutting or recip saw trimming	5–15 minutes

Typical charge time with a compatible Makita NiMH charger: ~60–120 minutes depending on charger output and battery temperature. Let hot packs cool to room temperature before charging.

Care, Storage, and Safety

• Charge only with Makita chargers that list NiMH compatibility for 12V pod-style batteries.
• Avoid deep discharge; recharge when you notice reduced power—don’t run completely flat.
• Store cool and dry, ideally around 40–60% charge if not used for weeks.
• Keep away from heat sources; do not short the terminals or expose to water.
• Cycle the battery every 2–3 months if in storage to maintain health.

Alternatives

• More runtime: Consider higher-capacity 12V NiMH options from the same pod-style family (e.g., 3.0Ah) if compatible with your tool and charger.
• Modern platform: If you need lighter weight, faster charging, and broader tool selection, consider upgrading to a current Makita 12V CXT or 18V LXT Li-ion system.

Pros and Cons

• Pros: Good runtime for legacy 12V tools, reduced memory effect vs. NiCd, direct fit for original pod-style interface.
• Cons: Heavier and lower energy density than Li-ion, performance drops in cold weather, requires NiMH-compatible charger.

FAQ

Will this work with my 12V Makita drill that used a 1220/1222/1234 pack?

If your tool accepts Makita 12V pod-style packs, this NiMH battery is generally compatible. Verify the tool’s voltage and the battery interface match.

Can I charge it on my old NiCd-only charger?

Use a charger that explicitly lists NiMH compatibility. Some Makita chargers support both NiCd and NiMH; NiCd-only chargers may not charge NiMH correctly.

Does NiMH have memory effect?

NiMH is far less prone to memory effect than NiCd. Routine deep discharges are not required and can shorten battery life—recharge when performance dips.

How should I store the battery long term?

Store cool and dry at roughly 40–60% charge. Top it up every 2–3 months if unused.

Is this compatible with Makita Li-ion tools?

No. It is for older 12V pod-style systems only. It does not fit slide-on CXT or LXT Li-ion tools.