Procell Intense D (PX1300) Alkaline Battery

The Procell Intense D (PX1300) is a professional 1.5V alkaline LR20 battery optimized for high‑drain and pulse‑load devices used in security, medical, facility, and industrial settings. It provides stable voltage under load, strong pulse capability, and a leak‑resistant build for reliable performance and fewer changeouts.

When to Choose Procell Intense vs. Constant

• Use Procell Intense (PX1300) if: your device draws high current, operates in short bursts or frequent pulses, or must deliver consistent power under load (e.g., electronic locks, odor dispensers, motion‑activated devices, professional flashlights, medical diagnostic tools).
• Consider Procell Constant for low‑drain, steady‑state applications where devices sip power over long periods (e.g., wall clocks, basic sensors, remote controls).
• Avoid alkaline D cells if your device explicitly requires rechargeable batteries (NiMH) or a different voltage chemistry (e.g., 3.6V lithium thionyl chloride). Always match the chemistry and voltage specified by the device maker.

Key Details and Specs

• Size/Format: D (LR20)
• Voltage: 1.5V nominal
• Chemistry: Alkaline (primary, non‑rechargeable)
• Design focus: high‑drain, pulse‑load professional devices
• Operating temperature: wide range typical of alkaline cells (commonly around −4°F to 129°F / −20°C to 54°C; check your device’s limits)
• Leak‑resistant construction: helps protect equipment in demanding environments

Common Professional Uses

• Security & access control: electronic door/safe locks, battery‑backed readers
• Facility management: odor dispensers, paper towel/tissue dispensers, high‑output sensors
• Medical: blood pressure monitors, portable diagnostic tools (follow device IFU)
• Industrial/utility: high‑drain beacons, test instruments, heavy‑duty flashlights

Typical changeout intervals: vary widely by device and usage. High‑drain, intermittent devices often see service intervals from a few months to a year. Track runtime by asset type and environment to set proactive maintenance cycles.

Compatibility and Best Practices

• Use only in devices specified for D‑size 1.5V alkaline batteries.
• Replace all cells in a device at the same time. Do not mix old and new batteries or different brands/chemistries.
• Do not recharge alkaline batteries and do not short‑circuit.
• For multi‑cell holders, observe polarity and ensure clean, corrosion‑free contacts.

Storage, Handling, and Procurement

• Store in a cool, dry place at room temperature; avoid heat, freezing, and direct sunlight.
• Keep in original packaging until use; rotate stock using FIFO to preserve shelf life.
• Bulk packs are available for professional purchasing to simplify maintenance cycles and reduce per‑device cost.

Alternatives

• Procell Constant D: better fit for low‑drain, always‑on devices.
• Rechargeable NiMH D: consider if devices are used daily with frequent replacements and support rechargeables; note different discharge behavior and maintenance.
• Lithium primary D: higher cost and different voltage/chemistry; only use if the device specifically allows it.

Safety and Environmental Notes

• Do not incinerate or disassemble. If a cell leaks, handle with gloves and follow your facility’s cleanup procedure.
• Recycle or dispose of in accordance with local regulations. Many municipalities and retailers offer battery collection points.

FAQ

Can I mix Procell Intense with other brands or older batteries?

No. Mixing brands, chemistries, or new and used batteries can cause leakage, reduced performance, or device damage. Replace all cells in a device at the same time with identical batteries.

Are these batteries rechargeable?

No. Procell Intense D (PX1300) are primary alkaline batteries and must not be recharged.

What temperatures can they handle?

Alkaline cells typically operate from about −4°F to 129°F (−20°C to 54°C). Performance drops at temperature extremes; verify your device’s specified range.

How do I estimate runtime?

Runtime depends on device current draw, duty cycle, and environment. Track actual changeout intervals per device type; use those records to set maintenance schedules. For precise planning, consult your device’s current profile and request manufacturer discharge data.

Is there a shelf‑life rating?

Procell batteries are designed for long shelf life. For best results, store cool and dry, keep in packaging until use, and follow FIFO stock rotation. Check date codes on packaging for inventory control.