Procell Intense AAA (PX2400)

Procell Intense AAA (PX2400)

PX2400 is a professional 1.5V alkaline AAA cell optimized for high‑drain, pulsed loads. Use it to reduce battery changes in devices that draw short, heavy bursts of current such as automatic faucets, soap/towel dispensers, high‑output flashlights, and certain medical instruments.

Key specs

Chemistry	Alkaline (manganese dioxide)
Nominal voltage	1.5 V
Size / designation	AAA / IEC LR03 / ANSI 24A
Shelf life	Up to 10 years (manufacturer‑rated when stored properly)
Operating temperature	Approx. −4°F to 129°F (−20°C to 54°C), device‑dependent
Dimensions	≈10.5 mm × 44.5 mm (standard AAA)
Weight	≈11 g per cell (typical)
Packaging	Professional bulk packs for fleet maintenance

When to choose PX2400

• Choose for pulsed, high‑drain devices: automatic faucets/dispensers, motorized locks, bright LED flashlights, wireless sensors with burst transmissions, and certain diagnostic tools.
• Use general‑purpose alkaline (e.g., Procell PC2400) for low‑drain or standby loads such as TV remotes, wall clocks, or simple sensors.
• Prefer lithium AAA in extreme cold/heat or for continuous heavy drain where maximum runtime and low weight are critical.
• Prefer NiMH rechargeable AAA for frequently cycled consumer gear (e.g., headlamps used daily) when charging infrastructure is available.

Typical use cases and expected runtimes

• Automatic faucet/soap dispenser (4×AAA): commonly lasts several months in commercial restrooms; about 6–18 months is typical depending on model, settings, and activations per day.
• High‑output AAA flashlight (single cell, 150–250 lm): about 1–2.5 hours on high, several hours on lower modes.
• Medical thermometers: hundreds to thousands of readings per set of cells under normal clinic use.

Actual runtime varies by device design, duty cycle, temperature, and cut‑off voltage. For multi‑cell packs, replace the entire set together.

Installation and maintenance

• Insert with correct polarity (+/−) as marked in the device.
• Do not mix old and new cells, brands, or chemistries; replace all cells in a pack at the same time.
• Keep contacts clean and dry; wipe with a lint‑free cloth if needed.
• Storage: cool, dry location; avoid heat and direct sun. Do not freeze.
• Remove depleted cells promptly. Do not attempt to recharge alkaline cells.
• Recycle where available; follow local regulations for disposal.

Compatibility and fit

• Fits any device that specifies AAA / LR03 / 24A alkaline cells.
• Suitable for single‑cell and multi‑cell holders commonly found in faucets, dispensers, and instruments.
• Not compatible with chargers designed for NiMH/NiCd; PX2400 is non‑rechargeable.

Practical alternatives

• Procell General Purpose AAA (PC2400): Better match for low‑drain/standby devices; may reduce cost per deployment.
• Lithium AAA (e.g., L92 type): Best for extreme temperatures, long storage under load, and continuous heavy drain; higher upfront cost but longer service life in many cases.
• NiMH rechargeable AAA: Cost‑effective over many cycles for daily‑use gear; requires chargers and periodic maintenance.

FAQ

Is the PX2400 rechargeable?

No. It is a primary (single‑use) alkaline cell. Do not attempt to recharge.

Can I mix PX2400 with other brands or chemistries?

No. Mixing can cause leakage, reduced performance, or rupture. Use identical cells from the same pack and replace all at once.

Will PX2400 work in very cold environments?

Alkaline performance drops in extreme cold. For sub‑freezing outdoor use, lithium AAA generally performs better.

What devices benefit most from Procell Intense?

Pulsed, high‑drain devices like automatic faucets/dispensers, motorized locks, and bright flashlights—where bursts of current are required—typically see longer service intervals versus general‑purpose alkaline.

How should I store spare PX2400 batteries?

Keep in original packaging, in a cool (around 59–77°F / 15–25°C), dry place. Avoid metal objects; do not refrigerate or freeze.